Eibenstock Automix 90 handleiding
Handleiding
Je bekijkt pagina 16 van 64
16
Technical Data
Automix 90
Nominal voltage 230 V ~ 110 V ~
Power input 1500 W 1500 W
Rated current 7,0 A 14,5 A
Order no. 07617 07618
Frequency: 50 - 60 Hz
Rated speed 50 rpm
Tank volume: 90 l
Batches up to: 80 kg
Stirrer holder: M 20, female thread
Protection class: II
Degree of protection: IP 20
Weight: approx. 35 kg
Interference suppression: acc. to: EN 55014 and EN 61000
Supply
Stirrer with stand, bucket, stirring rod and operating instructions in
cardboard box.
Intended Use
The Automix 90 tool is intended to be used to prepare and mix ready-
mixed plaster, mortar and concrete as well as gypsum, lime and other
building materials of medium to high viscosity and a maximum quantity of
80 kg.
General Instructions
The tool may be used only completely mounted with the stand supplied
along with it.
The tool’s working spindle is equipped with a M20 female thread.
Thread and front surfaces must be kept clean.
When assemble the stirring rod put the copper ring supplied along with
the tool between spindle and stirring rod to simplify the removal of the
stirring rod.
The stirring rod should be detached using a SW 27 open-end wrench.
5a
Bekijk gratis de handleiding van Eibenstock Automix 90, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eibenstock |
| Model | Automix 90 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10683 MB |
