Eibenstock Automix 1801 handleiding
Handleiding
Je bekijkt pagina 13 van 60
13
Technical Data
Automix 1801
Nominal voltage 230 V ~ 110 V ~
Power drain 1500 W 1400 W
Rated current 7,0 A 13,3 A
Order No. 07614 07615 / 07616
Frequency: 50 - 60 Hz
Rated speed 50 rpm
Batches up to: 50 kg
Stirrer holder: M 20, female thread
Protection class: II
Degree of protection: IP 20
Weight: approx. 26.5 kg
Interference suppression: acc. to: EN 55014 and EN 61000
Supply
Stirrer with stand, bucket, stirrer basket, protective shield and operation
manual in cardboard box.
Intended Use
The Automix 1801 tool is intended be used to prepare and mix ready-
mixed plaster, mortar and concrete as well as gypsum, lime and other
building materials of medium to high viscosity and a maximum quantity of
50 kg.
General Instructions
The tool may be used only together with the stand supplied along with it.
The tool’s working spindle is equipped with a M20 female thread.
Thread and front surfaces must be kept clean.
When assemble the stirring rod put the ring supplied along with the tool
between spindle and stirring rod to simplify the removal of the stirring rod.
The stirrer basket should be detached using a SW 27 open-end wrench.
Bekijk gratis de handleiding van Eibenstock Automix 1801, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eibenstock |
| Model | Automix 1801 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7333 MB |
