EGO STX4500 handleiding
Handleiding
Je bekijkt pagina 5 van 132
56 VOLT LITHIUM-ION CORDLESS LINE TRIMMER / BRUSH CUTTER 5
EN
BLADE THRUST CAUSES AND RELATED WARNINGS
NOTE:
The verbatim text of this sub-clause is applicable
for line trimmers that can be converted to a brush cutter.
Blade thrust is a sudden sideways, forward or backward
motion of the machine, which may occur when the blade
jams or catches on an object such as a sapling or a tree
stump. It can be violent enough to cause the machine and/
or operator to be propelled in any direction, and possibly
lose control of the machine.
Blade thrust and its related hazards can be avoided by
taking proper precautions as given below.
a) Maintain a firm grip with both hands on the
machine and position your arms to resist blade
thrust. Position your body to the left side of the
machine. Blade thrust can increase the risk of injury
due to the machine moving unexpectedly. Blade
thrust can be controlled by the operator if proper
precautions are taken.
b) If the blade binds, or when interrupting a cut
for any reason, switch the machine off and hold
the machine motionless in the material until the
blade comes to a complete stop. While the blade
is binding, never attempt to remove the machine
from the material or pull the machine backward
while the blade is in motion, otherwise blade
thrust may occur. Investigate and take corrective
actions to eliminate the cause of blade binding.
c) Do not use blunt or damaged blades. Blunt or
damaged blades increase the risk of jamming or
catching on an object, resulting in blade thrust.
d) Always maintain good visibility of the material
being cut. Blade thrust is more likely to occur in
areaswhereitisdifculttoseethematerial
being cut.
e) If you are approached by another person while
operating the machine, switch the machine off.
There is an increased risk of injury to other persons
being struck by the moving blade in the event of
blade thrust.
SAVE THESE INSTRUCTIONS!
Bekijk gratis de handleiding van EGO STX4500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EGO |
| Model | STX4500 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15509 MB |
