EGO Power+ ST1624E-T handleiding

20 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 16 van 20
56 VOLT LITHIUM-ION CORDLESS GRASS TRIMMER — ST1620E-T16
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
Grass trimmer fails
to start
The battery pack is not attached to the
grass trimmer.
Attach the battery pack to the grass trimmer.
No electrical contact between the grass
trimmer and battery.
Remove battery, check contacts and reinstall
the battery pack.
The battery pack is depleted Charge the battery pack.
The lock-off button is not depressed
before pressing the trigger.
Press down the lock-off lever and hold it, then
depress the trigger to turn on the tool.
The motor shaft or trimmer head is bound
with grass.
Remove the grass from the motor shaft and
trimmer head.
Grass trimmer
stops while cutting.
The guard is not mounted on the trimmer,
resulting in an overly long cutting line and
motor overload.
Remove the battery pack and mount the guard
on the trimmer.
Heavy cutting line is used. Use recommended nylon cutting line with
diameter 2.4 mm.
The battery pack or grass trimmer is too
hot.
Cool the battery or grass trimmer.
The battery pack is disconnected from
the tool.
Re-install the battery pack.
The battery pack is depleted. Charge the battery pack.
Trimmer head will
not advance line.
The motor shaft or trimmer head is bound
with grass.
Stop the trimmer, remove the battery, and clean
the motor shaft and trimmer head.
There is not enough line on the spool or
the line breaks from the eyelet.
Remove the battery and replace the cutting
line follow “LINE REPLACEMENT” section in
this manual.
The line is tangled. Remove the battery; remove the line from the
trimmer head and rewind following “RELOAD
THE CUTTING LINE section in this manual.
The line is too short. Remove the battery and pull the lines manually
while alternately pressing down and releasing
the trimmer head.
Heavy cutting line is used. Use recommended nylon cutting line with
diameter 2.4 mm.
Trimmer head malfunction. Replace the trimmer head immediately
performed by a qualified service technician.
Grass is wrapped
around trimmer
head and motor
housing.
Cutting tall grass at ground level Cut tall grass from the top down, removing no
more than 8 inches in each pass to prevent
wrapping.
The blade is not
cutting the line.
The line-cutting blade on the edge of the
guard has become dull.
Follow instructions to sharpen the line-cutting
blade with a file or replace it with a new blade.
Cracks on the
trimmer head
The trimmer head is worn out. Replace the trimmer head immediately; follow
the section "TRIMMER HEAD REPLACEMENT"
in this manual.

Bekijk gratis de handleiding van EGO Power+ ST1624E-T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkEGO
ModelPower+ ST1624E-T
CategorieNiet gecategoriseerd
TaalNederlands
Grootte1982 MB