EGO Power+ ST1511E-T handleiding

96 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 4 van 96
56 VOLT LITHIUM-ION CORDLESS LINE TRIMMER4
EN
OTHER SAFETY WARNINGS
Avoid Dangerous Environments – Don’t use
appliances on damp or wet slope.
Keep guards in place and in working order.
Keep hands and feet away from the cutting area.
To reduce the risk of injury, never work on a ladder
or on any other insecure support. Never hold the
cutting unit above waist height.
Check the cutting unit at regular short intervals
during operation, or immediately if there is a
noticeable change in cutting behavior.
For best results, your battery should be charged in
a location where the temperature is greater than
5° C and less than 40° C. Do not store it outside or
in vehicles.
If you are approached, stop the motor and cutting
unit.
Warn the operator of the danger of blade thrust
(only using with 3-teeth blade).
Blade thrust may occur when the spinning blade
contacts an object that it does not immediately cut.
Blade thrust can be violent enough to cause the unit
and/or operator to be propelled in any direction, and
possibly lose control of the unit.
Blade thrust can occur without warning if the blade
snags, stalls or binds.
Blade thrust is more likely to occur in areas where it
is difcult to see the material being cut.
Do not attach any blade to a unit without proper
installation of all required parts. Failure to use the
proper parts can cause the blade to y off and
seriously injure the operator and/or bystanders.
Discard blades that are bent, warped, cracked,
broken, or damaged in any way. Use a sharp blade
A dull blade is more likely to snag and thrust (only
using with 3-teeth blade).
A coasting blade/line can cause injury while it
continues to spin after the motor is stopped or
trigger is released. Maintain proper control until
the blade/line has completely stopped rotating.
Battery tools do not have to be plugged into an
electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
even when the tool is not operating. Take care when
performing maintenance or service.
Do not wash with a hose; avoid getting water in
motor and electrical connections.
If situations occur that are not covered in this
manual, use care and good judgment. Contact the
EGO Customer Service Center for assistance.
SAVE THESE INSTRUCTIONS!

Bekijk gratis de handleiding van EGO Power+ ST1511E-T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkEGO
ModelPower+ ST1511E-T
CategorieNiet gecategoriseerd
TaalNederlands
Grootte11832 MB