Edimax HP-5122WAK handleiding
Handleiding
Je bekijkt pagina 13 van 47
10
III. WI-FI CONFIGURATION
To make configurations to your HP-5102Wn (e.g. change the SSID & password)
you can use the product’s web-based control panel. To access the control
panel, follow the instructions below:
1.
Connect your computer to the HP-5102Wn using Wi-Fi (Default SSID:
EdimaxPLC_*** see product label) or using an Ethernet cable as shown
below:
2.
Change your computer’s IP address to 192.168.2.x where x = any number
between 3 and 254. Refer to the appendix if you need help.
Note: By default, the HP-5102Wn is set to use a
dynamic IP address from your router. This means that
order to access the control panel as shown here using
the default IP address, the HP-5102Wn must be
disconnected from your router. If using a dynamic IP
or if you later set your powerline adapter to use a
static IP address – then you do not need to disconnect
the HP-5102Wn from your router to access the control
panel. In such cases, use the new IP address to access
control panel instead.
Bekijk gratis de handleiding van Edimax HP-5122WAK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Edimax |
| Model | HP-5122WAK |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13148 MB |
Caratteristiche Prodotto
| Kleur van het product | Wit |
| Gewicht | 184 g |
| Breedte | 64 mm |
| Diepte | 43 mm |
| Hoogte | 102 mm |
