Edimax ES-5216P handleiding
Handleiding
Je bekijkt pagina 8 van 50
connect the other end of the cable to the power interface of ES-5216P.
1.5.2 Setting Up the Ethernet Interfaces
The ES-5216P provides twenty-four auto-MDI/MDI-X Ethernet service interfaces of standard RJ45 connectors. You
can use either the crossover or straight through cable to connect an interface.
Note: To ensure good quality of the data signal, the length of the network cable connected to the Ethernet
interface should be shorter than 100m.
1.6 Device Startup
1.6.1 Check Before Power-On
Before powering on the device, check the following:
Whether the voltage of the power supply is consistent with the power requirement of the device.
Whether the power cable is correctly connected.
Whether the device is correctly connected to the ground on the rear side.
1.6.2 Powering On the Device
After connecting the power cable, turn on the power switch. When the Power indicator turns on, the system starts
to initialize. When other indicators blink three times and the Power indicator is always on in green, the power
works normally.
1.7 Device Upgrade
You can upgrade software through any Ethernet port for ES-5216P. After software upgrade is complete, the system
reboots automatically.
Bekijk gratis de handleiding van Edimax ES-5216P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Edimax |
| Model | ES-5216P |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8463 MB |
