Edimax ES-5216P handleiding
Handleiding
Je bekijkt pagina 25 van 50
2.8 QoS Configuration
All switches or routers that access the Internet, rely on class information to provide the same forwarding treatment
to packets in the same class. Class information can be assigned by end hosts, or switches or routers along the path.
Priority can then be assigned based on a general policy, or a detailed examination of the packet. However, note that
detailed examination of packets should take place close to the network edge so that core switches and routers are
not overloaded.
Switches and routers along the path can use class information to prioritize the resources allocated to different
traffic classes. The manner in which an individual device handles traffic is called per-hop behavior. All devices along
a path should be configured in a consistent manner to construct a consistent end-to-end Quality of Service (QoS)
solution.
Choose QoS Setting, and the sub-menus of QoS Setting are shown as below.
2.8.1 Priority Mode
Choose QoS Setting > Priority Mode, and the following page appears. In this page, you can set the priority mode.
The system supports the following three priority modes.
Bekijk gratis de handleiding van Edimax ES-5216P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Edimax |
| Model | ES-5216P |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8463 MB |
