Edifier MR5 handleiding

Handleiding

1234567/ 7

Afdrukken

Je bekijkt pagina 1 van 7

2. What’s in the box?

Note:

•Images are for illustrative purpose only and may dier from the actual product.

•For the need of technical improvement and system upgrade, information and

specications contained herein may be slightly dierent from actual product. If

any dierence is found, the actual product prevails.

7. Bluetooth connection

4. Mode switch

8. Acoustic tuning

9. Specications

10. Troubleshooting

Total output power (RMS): R/L (Treble): 10 W+10 W,

R/L (Mid): 15 W+15 W,

R/L (Bass): 30 W+30 W

Frequency response: 46 Hz~40 kHz

Declaration for EU

Frequency Band: 2.402 GHz ~ 2.480 GHz

RF Power Output: ≤10 dBm (EIRP)

There is no restriction of use.

Quick start guide

Important safety instructions

3.5 mm to 3.5 mm audio cable

Power cable

3.5 mm to RCA audio cable

Speaker connecting cable

Manual

Cannot connect to your Bluetooth device

•Make sure that the distance between this product and your Bluetooth device

is less than 10 meters and there are no obstacles between them.

•Make sure that no device is connected to this product via Bluetooth.

•Make sure that this product is in Bluetooth pairing mode. If not, manually

switch it to this mode.

•Resta this product, enable Bluetooth function on your Bluetooth device,

and then t again.

•Reset this product to facto settings and t again.

No power

•Make sure that the power cable is properly connected.

•Make sure that the power supply is not disconnected.

No sound

•Make sure that this product and your device is properly connected.

•Make sure that the correct audio input source is selected.

•Make sure that the playback is not paused.

•Increase the volume of this product and your device.

Noise coming from speakers

EDIFIER speakers generate little noise, while the background noise of some

audio devices is too high. Please unplug audio cables and turn the volume

up. If no sound can be heard at 1 meter away from the speaker, there is no

problem with this product.

To learn more about EDIFIER, please visit www.edier.com

For EDIFIER warranty queries, please visit the relevant count page on

www.edier.com and review the section titled Warranty Terms.

USA and Canada: seice@edier.ca

South America: Please visit www.edier.com (English) or

www.edierla.com (Spanish/Pouguese) for local contact information.

With this app, you can

•control play from the Bluetooth

source device,

•control the master volume,

•select sound eects or customize EQs,

•peorm acoustic tuning,

•upgrade the rmware, and

•more functions.

Download EDIFIER ConneX app

1. With your sma device, scan the QR code on the quick sta guide or the

packaging.

•You can also search for "EDIFIER ConneX" in Apple App Store (iOS devices) or

Google Play (Android devices).

2. Download and install the app.

How to use this app

1. Connect your sma device with the speaker via Bluetooth.

2. In Bluetooth mode, open EDIFIER ConneX App on your sma device.

3. Tap the menu for settings and playback control.

EDIFIER ConneX app

3. Cable connection

Note:

•Power input: 100-240 V~ 50/60 Hz 700 mA

•This plug type is meant for illustration purpose only.

•All audio inputs including Bluetooth connection can be used in parallel.

•The speaker will be muted when you connect your headphones to the " " po.

You can control the headphone volume with the volume knob on the speaker.

EN

1. EDIFIER ConneX app

Press and hold the " " knob to switch the speaker between work mode and

standby mode.

Power saving function

(1) The speaker will enter power saving mode after 15 minutes of inactivity (no

audio playback or operation) if any Bluetooth device is connected. When playback

resumes, it will return to working mode in about 1 second.

(2) The speaker will power o after 15 minutes of inactivity (no audio playback or

operation) if no Bluetooth device is connected.

Note: This function is enabled by default. To disable or re-enable this function,

lower the volume to 0 and double-press the volume knob. The indicator will blink

once to conrm the function has been disabled. Otherwise, the indicator will blink

twice. You can disable this feature in the menu of "Settings" →

"Power saving mode" on EDIFIER ConneX App.

By the speaker knobs

"High" knob: Turn the knob to boost or cut high frequencies above

10 kHz by ±6 dB.

"Low" knob: Turn the knob to boost or cut low frequencies around

125 Hz by ±6 dB.

By the EDIFIER ConneX App

Low cuto: Attenuate frequencies lower than the specied frequency (20-100 Hz)

at a selected slope (6,12, 18, or 24 dB/octave).

Acoustic space: Select a gain level to compensate for the bass boost, which varies

with speaker placement, 0 dB for being in the middle of the room and -4 dB for

being in the corner. The closer the speaker is to a wall or corner, the smaller the

value is to be set.

Desktop control: When the speaker is placed on a desktop or an object is placed

in front of it, there may be an apparent increase in the decibel level at ceain

frequencies. Enable the feature to mitigate this eect.

5. Control

6. Indicator status

Note: Volume sync is not suppoed. To adjust the volume, adjust on the speaker

and your device separately.

Button/Knob Mode

Action

Work mode Press to switch sound eects.

Work mode Rotate clockwise to increase volume.

Work mode

Rotate counterclockwise to decrease

volume.

Bluetooth device

connected

Press and hold to disconnect the

current Bluetooth device and switch

the speaker to Bluetooth pairing

mode.

Bluetooth hidden

mode

Press to exit Bluetooth hidden mode

and enter Bluetooth pairing mode.

Indicator status Speaker status

Solid red Monitor sound eect

Solid green Music sound eect

Solid white Customized sound eect

Blinking Bluetooth pairing mode

Blinking and then in solid Bluetooth device connected

Blinking in red and green Upgrading the rmware

Active speakerPassive speaker

This speaker suppos the simultaneous connection of two Bluetooth devices.

Connect to a device

1. If no device is connected, press the " " button on the speaker. The indicator

will blink rapidly.

2. On your device, select "EDIFIER MR5" in its Bluetooth device list to connect,

and the indicator will be steady lit when the connection is established.

Connect to two devices

1. Connect to a device, and then press and hold the " " button for 1.5 seconds.

The indicator will blink rapidly.

2. On the second device, select "EDIFIER MR5" in its Bluetooth device list to

connect, and the indicator will be steady lit when the connection is established.

3. On the rst device, select "EDIFIER MR5" in its Bluetooth device list to reconnect.

•Pause or stop playback on the current Bluetooth device before streaming audio

from the second one.

Note:

•Pin code for connection is "0000" if needed.

•To enjoy all Bluetooth functions of this product, make sure that your audio

source device suppos A2DP and AVRCP proles.

•If no device is connected in 3 minutes, the speaker will switch to Bluetooth

hidden mode. In this mode, (1) new devices cannot nd the speaker, but (2) for

a device that exists in the pairing record of this speaker, you can select

"EDIFIER MR5" from its Bluetooth device list to reconnect. To exit from Bluetooth

hidden mode, press the " " button on the speaker.

•To disconnect from the current Bluetooth device, press and hold the " " button

on the speaker for 1.5 seconds.

•After switched to Bluetooth input, the speaker will reconnect to the last

connected devices automatically.

Studio Monitor

MR5

*

1.5s

1.5s

ON OFF

Bluetooth

Settings

EDIFIER MR5

DEVICES

Bluetooth

2:12

x1

-6dB +6dB

125Hz

-6dB +6dB

10kHz

-6dB +6dB

0

High

-6dB +6dB

0

Low

14:10

14:10

1234567/ 7

Bekijk gratis de handleiding van Edifier MR5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Monitor