Handleiding
Je bekijkt pagina 13 van 24
13
Installing the Door Handle
To install the door handle:
1. Remove the four screws from the side of the door. This should be the side opposite of the door
hinge.
2. Place and align the openings of the handle hinges over the screw holes in the side of the door.
3. Insert and tighten the screws to hold the handle in place.
Warning: Do not over-tighten the screws as this may cause damage to the handle or the
stainless steel door.
!
Installing the Guard Rail
Installing the Drip Tray
The guard rail helps to hold glasses on top of the cabinet in order to prevent spills and broken glass.
To install the guard rail:
1. Insert the four installation pegs on the outer edges of the top of the cabinet.
2. Place the guard rail onto the four installation pegs. You may need to push down on the guard rail
to ensure the rail has clicked into place on the pegs.
3. Screw the four small guard rail screws into the guard rail. This will lock the rail into position.
The surface mount drip tray is a reservoir designed to collect any runo liquid from overlled glasses,
leaking faucets, or spills. There are two pieces included for this tray. Place it on top of the cabinet (or
countertop) and position under the faucet(s).
Bekijk gratis de handleiding van Edgestar KC1500BSSOD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Edgestar |
| Model | KC1500BSSOD |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 2292 MB |
