Handleiding
Je bekijkt pagina 11 van 84
9
EN
Product usage
B
IMPORTANT! Before plugging in and starting the unit, make sure that all controls
are turned off or set to a low level.
Setup
Opening/closing the lid
CAUTION: Be careful not to pinch your fingers when opening or closing the lid.
• Open: Lift up the lid as far as it will go. Then, keeping the lid arm straight, lower the lid
approximately 1cm until the arm locks into place.
•
Close: Lift the lid up as far as it will go to release the arm lock. As you lower the lid, gently
assist the arm so that it bends forwards, then you can close the lid.
NOTE: Keep the lid closed when you are not using the unit to prevent dust collecting
on the turntable.
Safety screw
•
Before and after transporting the turntable, you must check that the safety screw is
securely fixed into place.
•
Use a screwdriver to turn the screw anticlockwise until it is firmly tightened and the
turntable is fixed into place.
Connections
Connect your device to the turntable using the cables and sockets detailed below:
Device Connection (cables not provided) Turntable Socket
Phone, iPad or
tablet, computer,
MP3 player, CD
player
Use a jack cable with 3.5mm plug. The
other end of the cable must fit your
audio device.
AUX
Earphones Plug the 3.5mm earphone jack cable
into the socket on the top of the unit.
External speaker Connect a 8.2mm AUDIO RCA cable to
the sockets on the turntable and into
the AUDIO IN L and R sockets of the
additional speaker.
NOTE: Always plug red plug to red
socket and white plug to white socket.
R and L LINE OUT
Bekijk gratis de handleiding van Edenwood Turntable Vintage, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Edenwood |
| Model | Turntable Vintage |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 6240 MB |
