Ecovacs WINBOT NEO handleiding
Handleiding
Je bekijkt pagina 18 van 22
18
EN
Troubleshooting
NO. Malfunction Possible Causes Solutions
1
WINBOT moves in an irregular
pattern during cleaning.
The Mopping Pad is too wet.
Replace the Mopping Pad as described in Maintenance. Use
the ECOVACS WINBOT Cleaning Solution as described in
manual and restart the cleaning cycle.
The Driving Wheel Tracks are dirty. Clean the Driving Wheel Tracks as described in Maintenance.
2 WINBOT does not move.
The Mopping Pad is attached improperly. Please remove the Mopping Pad and reattach.
There are gaps or cracks on the surface to
be cleaned.
Hold the Driving Wheel Tracks or the Power Cord.
Meanwhile, press Direction Buttons in ECOVACS HOME App
to let the WINBOT leave the gap or barrier.
The Mopping Pad Plate is blocked by
small obstacles on the glass.
3
WINBOT cannot move or
moves in circles.
The Driving Wheel Tracks are stuck.
Check if there is any dust or debris on the Driving Wheel
Tracks. If so, please clean the Driving Wheel Tracks as
described in Maintenance. Start WINBOT again. If problem
persists, please contact Customer Service.
4
Voice prompts insufcient
water in the Reservoir.
No ECOVACS WINBOT cleaning solution
in the Reservoir.
Please add ECOVACS WINBOT cleaning solution. Do not
add puried water and ltered water.
5
WINBOT stays still or moves
in an irregular pattern during
cleaning.
The bumper rail is stuck.
Remove WINBOT from the window. Check if the bumper
rail is stuck. Clean the bumper rail and restart WINBOT. If
problem persists, please contact Customer Service.
The bumper rail is damaged.
Spherical Sensors signal abnormity.
A. Remove the Mopping Pad and re-attach it making sure it will
not cover or affect the Spherical Sensors.
B. Clean the Spherical Sensors as described in Maintenance.
C. If the problem persists, please contact Customer Service.
Fan malfunction.
A. Clean the Fan as described in Maintenance.
B. If the problem persists, please contact Customer Service.
Bekijk gratis de handleiding van Ecovacs WINBOT NEO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecovacs |
| Model | WINBOT NEO |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 1498 MB |
