Ecovacs WINBOT NEO handleiding
Handleiding
Je bekijkt pagina 13 van 22
13
EN
* Do not stick the WINBOT too close to the edge when cleaning the frameless
glass. It is recommended to be more than 10cm away from the edge.
* WINBOT can only clean flat surfaces. Please make sure that the glass
thickness is not less than 3mm (0.12").
* Do not put the fan close to hair and other small objects after power on, so as
not to block the fan.
* Before cleaning, please observe the area to attach WINBOT for any small
particles. If there are any, please remove them or switch to a particle-free
area to avoid scratching the glass.
* Clean the Wiping Pad in time and make sure that any small particles
on it are completely removed to avoid scratching the glass.
3
Start
① Turn the Power Switch to "I ".
② Attach to the Window.
Method 1: Shortly press
on WINBOT, then attach it to the glass.
Method 2: Evenly press WINBOT onto the glass for 2s and more to
make it firmly attached until you hear a voice prompt.
WINBOT will start cleaning after it has attached to the window successfully.
4
Maintenance during Cleaning
For heavily stained glass, please wash or replace the Mopping Pad
several times and clean the four Spherical Sensors in time.
Pause
5
Finish
During cleaning, press
on WINBOT or pause it via App.
Bekijk gratis de handleiding van Ecovacs WINBOT NEO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecovacs |
| Model | WINBOT NEO |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 1498 MB |
