Ecovacs Winbot Mini handleiding
Handleiding
Je bekijkt pagina 15 van 201
14EN
1.Connect the power supply and long press the WINBOT start button
for 2 seconds.
2.After hearing the fan start, place the bottom of the WINBOT (the
side with the mopping pad) on the glass. WINBOT will adhere to the
window automatically and start cleaning.
1
Start
2
Maintenance during Cleaning
For heavily stained glass, please wash or replace the mopping pad
several times and clean the four spherical sensors in time.
* Clean in time when the mopping pad is dirty. Make sure that the small
particles on the mopping pad are completely removed to avoid scratching the
glass.
4. Quick Start
* Do not stick the WINBOT too close to the edge when cleaning the frameless
glass. It is recommended to be more than 10cm away from the edge.
* WINBOT can only clean flat surfaces. Please make sure that the glass
thickness is not less than 3mm.
* Do not put the fan close to hair and other small objects after power on, so as
not to block the fan.
* Before cleaning, ensure a clean area larger than WINBOT's size, then attach to
windows.
* Please dry the water droplets at the spray outlet before cleaning.
* Do not stand below or near the WINBOT while it is cleaning.
Bekijk gratis de handleiding van Ecovacs Winbot Mini, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecovacs |
| Model | Winbot Mini |
| Categorie | Stoomreiniger |
| Taal | Nederlands |
| Grootte | 16444 MB |