Ecoteck Unica handleiding
Handleiding
Je bekijkt pagina 32 van 40
Use and maintenance manual - Model: “UNICA 10 V/C”
32
ENGLISH
ALARM CODE REASON
30
BYPASS
EMERGENCY
HATCH OPEN
La botola di sicurezza si è aperta a seguito
blackout.
SOLUTION
Once the electrical power is restored, lock
the hatch in place using the special knob,
pushing it completely downwards.
If the problem persists, contact the Support
Service.
ALARM CODE REASON
31
FAULTY
PELLET/WOOD-AIR
VALVE
The automatic movement system of the
valve controlling the pellet/wood ratio is not
working correctly.
SOLUTION
Reset the alarm. Press the I/0 to turn off the
stove, wait for 5 seconds, then restart the
stove.
If the problem persists, contact the Support
Service.
ALARM CODE REASON
32
FAULTY BYPASS
EMERGENCY
SYSTEM
One of the components of the emergency
bypass hatch system is faulty or blocked.
SOLUTION
Move the knob to check the correct
movement of the lever and that the hatch
is kept closed.
If the problem persists, contact the Support
Service.
18
CLEANING THE APPLIANCE
Before carrying out any cleaning operation on the
appliance, take the following precautions:
• switch off the product and in “OFF” status
disconnect the power supply cable;
• ensure all the parts are cold to touch;
• ensure the combustion ash is
completely out.
To clean the surfaces, on the painted metal parts, use a
cloth soaked in water and soap.
Using abrasive detergents or diluents will damage to
the surface of the product.
Please carefully adhere to the following
instructions for correct cleaning of the appliance.
Non-compliance could cause its
malfunctioning.
Product installation must take place in in such a
way as to ensure easy access to the appliance
itself and to the ue for cleaning and maintenance
operations.
18.1
CLEANING THE FIREPLACE
Open the re door, using the specic
tool and:
• vacuum the slide bringing the ash to the brazier;
• dismantle the ame trap, vacuum the compart-
ment hidden by the ame trap (paying utmost atten-
tion not to damage the sensor placed behind the
ame trap).
• the vermiculite does not require cleaning, in any
case if you intend eliminating the soot dust, only use
a soft bristle brush.
OPERATING PROCEDURE:
Open the re door using the “cold lever”
supplied with the product and Insert the “cold lever”
in the specic compartment, as indicated
in the gure below:
Bekijk gratis de handleiding van Ecoteck Unica, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecoteck |
| Model | Unica |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8886 MB |
