Ecoteck Libera handleiding
Handleiding
Je bekijkt pagina 41 van 48
Use and maintenance manual, model “LIBERA 8 V/C - LIBERA 11 V/C”
ENGLISH
41
hours: risk of re in the ash vacuum cleaner and/
or burns.
19.2 CLEANING OF THE DOOR GLASS
Before cleaning the glass, carefully remove the
ash deposited in the gaps between the door and
glass with an ash vacuum cleaner.
It is recommended to always clean the glass
when cold, using a soft cotton cloth moistened
with a little water and combustion ash (which has
an abrasive function): avoid as much as possible
the use of products with additives which could,
over time, deteriorate the seals, the glass and the
painted parts. Above all, never spray the product
directly on the glass: spray it on the cloth and then
clean the glass.
Do not turn on the appliance if you notice any
damage to the glass.
Contact the Service Centre for replacement.
OPERATING PROCEDURE:
clean with a soft cotton cloth as shown in the
gure below.
19.3 CLEANING OF THE ASH PAN
Remove the drawer from the appliance and
remove the ash deposit using an ash vacuum
cleaner. Make sure that the embers have cooled
down, as hot embers could damage the vacuum
cleaner.
The frequency of the cleaning operations depends
on the quality of the pellets used and the daily
hours of use of the product. There may be a need
to change the cleaning frequency accordingly.
OPERATING PROCEDURE:
Open the door, as explained in point 18.1 and,
using the handle of the drawer, release it, as
shown in the gure.
Remove the ash drawer and empty it, as in the
gure below:
During this phase, pay particular attention, as the
embers keep burning beneath the ash for several
hours: risk of re in the ash vacuum cleaner and/
or burns.
19.4 CLEANING OF THE PELLET TANK
It is recommended to regularly clean the bottom
of the pellet tank to eliminate the sawdust which
accumulates after prolonged use. As for the
cleaning frequency, follow the indications listed in
the table in chapter 19.5
It is recommended to let all the pellets end up
in the hopper: at that point it will be possible
to vacuum the bottom using an ash vacuum
cleaner. If you want to recover the few remaining
pellets, just remember to clean the ash vacuum
cleaner before the operation and then sieve
what you have vacuumed up.
Cleaning the tank on a regular basis prevents
possible malfunctioning of the loading auger and
subsequent machine downtimes.
At the end of the season it is mandatory to empty
the pellet tank, thoroughly vacuum any the
sawdust and, taking advantage of the “auger rst
load" function, empty the auger from any pellets
left in it. This is to prevent the pellets from absorbing
Bekijk gratis de handleiding van Ecoteck Libera, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecoteck |
| Model | Libera |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9584 MB |
