Ecoteck Libera handleiding
Handleiding
Je bekijkt pagina 15 van 48
Use and maintenance manual, model “LIBERA 8 V/C - LIBERA 11 V/C”
ENGLISH
15
• connect the plug of the power cable to the wall
socket.
power
t.ext connector and probes
integrated Wi-Fi
It is possible to connect an external
chronothermostat (t.ext) to the appliance for its
modulation or switch-on/off combined with the
Comfort Clima function. For connection and
management of the "external thermostat" and
"Comfort Clima" functions, refer to the dedicated
chapter in this manual.
It is mandatory that the system is equipped with
earthing and a differential switch, as per the
laws in force. Also, make sure that the socket is
compatible with the type of plug on the power
cord used.
4 MAINTENANCE
Testing and maintenance operations, with the
exception of ordinary cleaning (see related
section in this manual), must be carried out by an
authorized technician. Before any maintenance,
remember to adopt the following safety measures:
• all parts of the product must be "cold";
• make sure that there is no form of combustion
(e.g., ash and embers still hot);
• always use protective devices;
• pull the plug out of the socket;
• once the maintenance is complete, restore the
product, taking care to reactivate all the safety
devices.
4.1 CHIMNEY SYSTEM MAINTENANCE
The ue pipe must always be clean, as deposits
of soot or unburned residues can clog its section,
thus reducing draft and compromising proper
functioning of the product. Moreover, if present
in large quantities, they can catch re. It is
mandatory to have the ue and chimney pot
cleaned and checked by a qualied chimney
sweep at least once a year or after a prolonged
inactivity. At the end of the check/maintenance,
get a report certifying that the system is safe.
Neglecting to clean the product jeopardizes the
safety of the system.
4.2 PRODUCT MAINTENANCE
To be carried out at least either after every winter
or at any “Service Hours” signalling (signal which
appears on the remote control when service
hours exceed, value beyond which optimal
product operation is not guaranteed). During
maintenance, the authorized technician will have
to:
• carry out a complete and thorough cleaning of
the smoke duct;
• check the tightness of all seals and gaskets;
• remove broken pellet residue inside;
• reassemble the appliance in all its parts;
• check proper functioning and combustion.
DO NOT DUMP ASH AND EMBERS FROM THE
GRATE INTO THE HOLE OF THE BRAZIER - DANGER
OF BREAKAGE OF THE MECHANICAL BRAZIER
CLEANER AND/OR MALFUNCTIONING OF THE
ELECTRIC RESISTOR FOR PELLET IGNITION.
5 PRODUCT TECHNICAL DATA
This chapter provides the end user with all the
information relating to the technical data of
the product: overall dimensions, installation
dimensions and minimum mandatory distances to
be kept from walls, furniture and any ammable
objects that can be found in the premises where
the product is installed.
5.1 PRODUCT DETAILS
PRODUCT DETAILS
EU 2015/1186
Brand
Nobis
Model LIBERA 8 V/C
LIBERA 11 V/C
During operation
PELLETS WOOD PELLETS
Energy efciency class
A+ A+ A+
Direct heating output (kW)
8.2 8.1 11.6
Indirect heating output (kW)
- - -
Bekijk gratis de handleiding van Ecoteck Libera, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecoteck |
| Model | Libera |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9584 MB |
