EcoFlow TRAIL 200 DC handleiding
Handleiding
Je bekijkt pagina 7 van 167
05
Get Started
• In this chapter, instructions that apply to both TRAIL 200 DC and TRAIL 300 DC
are illustrated using the TRAIL 300 DC as an example.
Power On/Off
The product does not require manual power-on; buttons and ports can be used immediately.
After long periods of inactivity, the product will enter standby mode without requiring manual
shutdown.
Power Your Appliances
Via USB Output Port
• Standard Mode
Connect your devices directly to the USB ports on the power station.
• Low Current Mode
The USB-A output ports on this power station support low current mode. It is recommended
to enable this mode when charging low-power devices such as Bluetooth earphones, tness
bands, or smartwatches via the USB-A output ports.
How to Use This Mode
1. Connect a low-power device to the USB-A output ports.
2. Double press the multifunction button. The USB-A icon on the display will ash, indicating
that low current mode is enabled.
3. Low current mode remains active for approximately 3 hours. You can manually exit the
mode by double pressing the button again, or it will turn off automatically after about 3
hours.
4. If the device is not fully charged after the mode exits, you can double press the
multifunction button again to re-enable low current mode and continue charging.
Bekijk gratis de handleiding van EcoFlow TRAIL 200 DC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EcoFlow |
| Model | TRAIL 200 DC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16706 MB |
