Ecm Technika V Profi PID handleiding
Handleiding
Je bekijkt pagina 25 van 56
ENGLISH
Translation of the original German user manual 24
3.2 Technical data
Voltages:
EU: 230 V
UK: 230 V
NZ: 230 V
AU: 230 V
US: 115 V
JP: 100 V
Frequency:
EU: 50 Hz
UK: 50 Hz
NZ: 50 Hz
AU: 50 Hz
US: 60 Hz
JP: 50/ 60 Hz
Power:
1,200 W – 1,400 W
Water tank:
approx. 3.0 l
Measurements:
w x d x h / 325 mm x 475 mm x 390 mm
Weight:
28 kg
Measurements
with portafilter:
w x d x h / 325 mm x 580 mm x 390 mm
4 MACHINE INSTALLATION
The installation is to be carried out by qualified specialists and according to the following
instructions and in compliance with valid laws and local regulations.
4.1 Preparation for installation
• Place the machine on an even and stable surface.
• Make sure that the machine is on a water-resistant surface in case of water spillage or
leakage.
• Never place the machine on hot surfaces.
4.2 Electrical connection
• Make sure that the local main voltage supply corresponds to the information given on
the type plate on the front panel of the espresso machine.
• Make sure that you use the correct power plug for your country.
• Plug the machine into a grounded socket only and do not leave it unattended.
• Do not roll or bend the power cord.
• Do not use an extension cord / do not use a multiple socket.
4.3 Water supply connection
Important
Make sure that the machine is on a water-resistant surface in case of water spillage or
leakage.
Make sure that the fixed water connection of your machine is connected to a potable water
supply having an operating pressure ranging between 0 and 1.5 bars. We recommend to use
a pressure regulator and a shut-off valve in case the operating pressure exceeds 1.5 bars or
frequently fluctuates. The shut-off valve should be easily accessible, so that the water flow
may be stopped at any time.
Make sure that the shut-off valve is closed or turned off when the machine is not in use to
prevent any possible water leakage.
Caution!
High water pressure can result in damages to property and machine. Please make sure the
water pressure does not exceed 2 bar.
Position “0”: water tank Position “1”: direct
waterconnection
Bekijk gratis de handleiding van Ecm Technika V Profi PID, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecm |
| Model | Technika V Profi PID |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11541 MB |