Ecler WP22DN handleiding
Handleiding
Je bekijkt pagina 6 van 19
6
• Double gang size, compatible with Ecler double gang surface mount installation
box (WPa2SMBOX, supplied by default with each unit) and with Ecler double
gang flush mount installation box (WPa2FMBOX, optional)
• Double set of front panel plates: one with access to the inputs’ gain selector, and
the other one without access to the gain selector
5. INSTALLATION
The installation of the WP22DN unit comprises the following steps.
5.1. Mounting the unit
1. Remove the front panel covers, held in place by magnets. You can use the
magnet provided as a tool, by making contact in the upper right corner of the
cover and gently pulling on it.
2. Connect the RJ-45 connector on the CAT5 or higher cable that will connect
the unit to the local area network. If necessary (see below section Installing
an External Power Supply) - connect an external power.
3. If required, connect the analogue audio outputs at the back side of the unit
(equipped with Euroblock terminals) to the desired audio device. These 2
outputs are an exact copy of the 2 outputs available with XLR connectors at
the front panel.
4. Screw the device to the surface mount box or flush mount box.
5. Mount the desired set of front panel covers (with or without access to the
inputs’ gain trimmers), held in place by magnets.
WP22DN top view
Bekijk gratis de handleiding van Ecler WP22DN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecler |
| Model | WP22DN |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3220 MB |
