Ecler VEO-XWT44E handleiding
Handleiding
Je bekijkt pagina 8 van 23
8
12. USB-C LED: The LED illuminates orange when the USB-C port is connected to a
source device, and it will turn green once the device is selected as input source.
13. DISPLAY ON/OFF: Press the blue-backlight button to turn on/off the display by
automatically sending CEC and RS-232 command (Programming required). For
more details, please refer to 8.2 Display Control.
14. SOURCE AUTO:
o Press the blue-backlight button to select the next input source.
o Press and hold the button at least 3 seconds to enable auto switching
mode. For more details, please refer to 8.1 Source Switching.
6.2. Rear Panel
1. HDBT OUT (POC): RJ45 HDBaseT output port to connect to the HDBT IN port of
the receiver by a CATx cable. It supports 12V-48V PoC to enable the switcher
can be powered from a compatible receiver.
2. DC IN: Power port to connect 24V DC power adapter.
3. DC OUT: 2-pin terminal block to connect a compatible device which needs to be
powered.
4. IR IN: 2-pin terminal block to connect third party control system.
5. RS-232: 3-pin terminal block to connect a control device (e.g. PC) to send the RS-
232 command to control this unit, or to control the far-end third party device. For
more details, please refer to chapter RS-232 Control.
Bekijk gratis de handleiding van Ecler VEO-XWT44E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecler |
| Model | VEO-XWT44E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2473 MB |
