Ecler VEO-XTI2L handleiding
Handleiding
Je bekijkt pagina 37 van 85
37
11.2 Configuring video wall mode using the web interface
11.2.1 Basic configuration procedure
The video wall configuration includes "Basic" and "Advanced" configurations. Under
"Basic Setup", the main settings for putting together the video wall are provided. Through
this page, you can set the size of the video wall structure (transmitter and receiver must
be set to the same size), the position of the screen, the bezel and gap compensation and
the rotation or stretching of the screen.
You need to select this device, "This", at the bottom of the page in order to control the
current device. It is possible to control multiple devices from the same page by selecting
the corresponding OSD/IP address, as explained below.
Bekijk gratis de handleiding van Ecler VEO-XTI2L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecler |
| Model | VEO-XTI2L |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18762 MB |
