Ecler VEO-XTI1CG2 handleiding
Handleiding
Je bekijkt pagina 10 van 34
10
PRECAUTIONS
PACKAGE
CONTENTS
DESCRIPTION
&
FEATURES
INSTALL
&
CONNECT
START-UP
&
OPERATION
PANEL
FUNCTIONS
TECHNICAL
DATA
4.2.4 MULTICAST MODE
When VEO-XTI1CG2 and VEO-XRI1CG2 devices are connected in a point to multipoint or
multipoint to multipoint topology, every transmitter and receiver should have a unique IP
address. When possible, it is recommended to create an independent IP video network using
managed network switches. Use of gigabit switches with an IGMP support will create the
most appropriate scenario.
1. Set the IP address for each transmitter and receiver.
2. Connect the source devices to the HDMI ports of the VEO-XTI1CG2 transmitters.
3. Connect the HDMI endpoints to the HDMI ports of the VEO-XRI1CG2 receivers.
4. Connect Audio IN/OUT to a sound device and select the required audio mode.
5. Connect an RS-232 cable from the automation system to the transmitters ports.
6. Connect RS-232 cables from the receivers to the ports of the devices to control.
7. Connect all VEO devices to the network switch using Cat. 5e/6/7cables.
8. Power VEO-XTI1CG2 transmitter and VEO-XRI1CG2 receiver with the included
power adapter and power the switch. In case the switch supports PoE (Power over
Ethernet), it will not be necessary to power the VEO devices locally.
9. Choose the desired ID channel for each of the VEO devices in order to establish the
required video transmission flows.
Bekijk gratis de handleiding van Ecler VEO-XTI1CG2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecler |
| Model | VEO-XTI1CG2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6592 MB |
