Ecler VEO-XRI2L handleiding
Handleiding
Je bekijkt pagina 17 van 85
17
7.2 How to find out the IP address of devices
VEO-XTI2L and VEO-XRI2L devices have the "Auto IP" function set by default. This
provides automatic IP address assignment on devices that are connected to the same
network. The factory-set IP subnet is 169.254.x.y.
To find out the IP for each device, it is recommended to consult the ‘How to find devices
in EclerNet Manager’ and ‘How to find devices using Control Centre’ chapters.
If you do not have a PC, it is also possible to find out the IP address using the following
procedure:
Receiver
• Connect the HDMI output of the receiver to a display. The receiver will display the
IP address information in the lower right-hand corner of the monitor. The 'Local IP'
is the address for the receiver
Bekijk gratis de handleiding van Ecler VEO-XRI2L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecler |
| Model | VEO-XRI2L |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18762 MB |
