Ecler VEO-XRI1CG2 handleiding
Handleiding
Je bekijkt pagina 21 van 34
21
PRECAUTIONS
PACKAGE
CONTENTS
DESCRIPTION
&
FEATURES
INSTALL
&
CONNECT
START-UP
&
OPERATION
PANEL
FUNCTIONS
TECHNICAL
DATA
5.2.1.2 COMMAND LIST
It is important to add carriage return (<CR>,\r,0x0D) and line feed (<LF>,\n,0x0A)
characters at the end of each command:
How do you have to enter the command?
To launch a remote control command, it needs to be written as follows:
“<Command> [Param 1] <Variable> [Param 2]”
[Param 1], [Param 2] will not always be required for every command.
EXAMPLE OF USE:
“SET DEC 1 SWITCH ENC 2\r\n” will assign Source Local ID of VEO-XRI1CG2 with Local
ID 1 to the same as VEO-XTICG2 Local ID.
Transmitter and Receiver Control
Command
Variable
Description
SET ENC [enc]
(1)
or
SET DEC [dec]
(2)
ID [id]
• id = [1..762]
Set the index ID of the transmitter or
receiver.
SET ENC [enc]
(1)
EDID COPY [dec]
(2)
Set the transmitter EDID copy from
receiver.
EDID DEFAULT [edid]
• edid =
00: HDMI 1080p@60Hz, Audio 2CH PCM
01: HDMI 720p@60Hz, Audio 2CH PCM
02: DVI 1280x1024@60Hz, Audio None
03: DVI 1920x1080@60Hz, Audio None
04: DVI 1920x1200@60Hz, Audio None
05: HDMI 1920x1200p@60Hz, Audio
2CH PCM
06: Copy EDID
07: User EDID 1
08: User EDID 2
Set the transmitter Default EDID.
SET DEC [dec]
(2)
SWITCH ENC [enc]
(1)
ALL
Set the receiver switch all signals.
Note: enc=0 mean no source in this case
Bekijk gratis de handleiding van Ecler VEO-XRI1CG2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecler |
| Model | VEO-XRI1CG2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6592 MB |
