Ecler VEO-MXH88D handleiding
Handleiding
Je bekijkt pagina 36 van 44
36
PRECAUTIONS
PACKAGE
CONTENTS
DESCRIPTION
&
FEATURES
INSTALL
&
CONNECT
START-UP
&
OPERATION
PANELS & REMOTE
FUNCTIONS
TECHNICAL
DATA
WebGUI
FRIMWARE
UPGRADE
6.8 Settings
This section allows to modify and show network parameters and control protocol parameters
TCP/UDP, modify web login account and password, reboot device, general restore factory,
user restore factory.
• Mac address can only be displayed. It cannot be modified.
• IP address is 192.168.1.168 by default. It can be modified.
• After DHCP is opened, dynamic IP is used. In this case, the IP address cannot be
modified and can assign by router.
• After DHCP is off, static IP is used. In this case, the IP address can be modified.
After the modification, click Apply.
• Net Mask and Gateway address can be modified, but the prerequisites are same as the
IP address.
• DHCP use two-way button as switch, click directly to open DHCP (Green button means
open DHCP and Gray means close DHCP).
• TCP port: Configure port (5000 by default) to access VEO-MXH88D.
• UDP Port: Configure the port (5001 by default) to access VEO-MXH88D.
• Account management: enter your account and password in the white box, Click Apply.
It takes effect on next login, support 1~15 characters (numbers, letters, and underscores.
• Click Reboot / Factory General / Factory User, click enter according to your desired
option.
Bekijk gratis de handleiding van Ecler VEO-MXH88D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecler |
| Model | VEO-MXH88D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9979 MB |
