Ecler PAGENETDN handleiding
Handleiding
Je bekijkt pagina 15 van 25
15
▪ From EclerNet Manager, you can release the devices controlled by
the computer through the creation of a new project (File -> New
Project), or by disconnecting them from the network one by one
(right mouse button -> Disconnect)
▪ From a WPNETTOUCH / WPmSCREEN, you can release the
devices controlled by the unit by setting the Enable UCP Server
option on NO.
7.3. Network Configuration menu
This menu allows modifying the network connection parameters of the WPNETTOUCH
unit: IP address, network mask and gateway.
Note: neither the WPNETTOUCH nor any other EclerNet device supports the protocol
of dynamic allocation of IP addresses (Dynamic Host Configuration Protocol, or DHCP),
so it's always necessary to manually assign them static addresses
7.3.1 Factory Preset Network settings
The factory default network settings for EclerNet Manager compatible devices are as
follows:
• IP: 192.168.0.100
• Mask: 255.255.255.0
• Gate: 192.168.0.1
• UDP Port: 2210
Bekijk gratis de handleiding van Ecler PAGENETDN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecler |
| Model | PAGENETDN |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4722 MB |
