Ecler MIMO88 handleiding
Handleiding
Je bekijkt pagina 15 van 30
15
9 TECHNICAL CHARACTERISTICS
MIMO88
DSP
DSP
2 x 32/64bit
Sampling Rate
48kHz
Latency IN to OUT
<2.9ms (+1ms for 16x16)
Converters
Resolution
24bit AKM
Dynamic Range
AD:110dB, DA: 115dB
Analogue
8+8 Input/Output
Terminal block (Symmetrical)
2 monitor output
Terminal block (Symmetrical)
Headphones related
Jack ¼
Analogue Input headroom
+27dBV = +30dBu
Max. output level
+18dBV = +21dBu
Input sensitivity @ 0dBV out
From -50dBV to +10dBV in 0.5dB step
Input Impedance
Balanced, >4kΩ
Phantom power
+42VDC, 5mA max. software switched
Headphones
>200mW/200Ω
Frequency response (-3dB)
5Hz to 24kHz
Flatness
better than ±0.1dB
THD+Noise @ 1kHz, 0dBV input (line)
<0.004%
THD+Noise @ 1kHz, -40dBV input (mic.)
<0.008%
Output Noise floor FFT (20Hz - 20kHz)
better than 115dB
Interchannel crosstalk (20Hz - 20kHz)
better than 90dB (100dB typ.)
Channel Leakage (20Hz - 20kHz)
better than 100dB (115dB typ.)
CMRR 20Hz- 20kHz
65dB typ.
Processing
Input Level (x8)
Range: from Off to 0 dB
Mute: Yes
Signal Polarity reverse: Yes
Metering: VU+clip pre & post fader
Output Level (x8)
Range: from Off to 0 dB
Mute: Yes
Solo: Yes
Signal Polarity reverse: Yes
Metering: VU+clip pre & post fader
Output Gain
Range: from 0 to +6 dB
Input Delay (x8)
from 0 to 1000 ms
Units: sec/ms/m/cm.
Output Delay (x8)
from 0 to 1000 ms
Units: sec/ms/m/cm.
Parametric Eq. Types
(4 max per input)
(8 max per output in 8x8 mode)
(4 max per output in 16x16 mode)
Bypass / On-Off all channels
Param Eq. Freq: 20Hz-20kHz
Gain: -60/+12 dB
Q: 0.3 to 200
Low & High Shelf 6/12 dB/oct
Bekijk gratis de handleiding van Ecler MIMO88, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecler |
| Model | MIMO88 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3164 MB |
