Ecler MIMO7272DN handleiding

32 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 7 van 32
7
o Level, mute, vumeters and phase adjustment in inputs and outputs.
o Internal signal generator (sinusoidal signal, pink noise, white noise, polarity
test).
o Parametric EQ on inputs and outputs.
o Delays on inputs and outputs.
o Noise gate / compressor on input channels.
o Compressor / limiter on outputs.
o Priorities (ducking) between input channels.
o Virtual and physical paging consoles
The programming of MIMO7272DN is done using the EclerNet Manager application
(*).
Refer to the EclerNet Manager Application manual for more information.
(*) The EclerNet Manager application is available for download at www.ecler.com.
INSTALLATION
5.1. Location, assembly and ventilation
MIMO7272DN has been specially designed to be placed in 19" rack structure, occupying
one unit.
It is very important that, as a heat generating element, MIMO7272DN is not completely
enclosed or exposed to extreme temperatures. Fresh air should be allowed to pass
through the ventilation holes in the chassis, leaving at least one free rack unit between
each piece of equipment and those installed above and below it in the rack frame.
If the installation consists of several amplifiers in the same rack or is carried out inside
cabinets closed by means of doors, it is highly recommendable to equip them with forced
upward ventilation, installing fans at their lower and upper ends. This upward flow of
ventilation will favour the dissipation of the heat generated in its interior.
5.2. Mains connection and power on
MIMO7272DN operates on alternating voltages from 90 to 264V and 47 to 63 Hz. This
device is equipped with an oversized power supply capable of adapting without any type
of adjustment to the mains voltage of any country in the world.

Bekijk gratis de handleiding van Ecler MIMO7272DN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkEcler
ModelMIMO7272DN
CategorieNiet gecategoriseerd
TaalNederlands
Grootte3238 MB

Caratteristiche Prodotto

Gewicht3250 g
Breedte482.6 mm
Diepte266.5 mm
Hoogte44 mm
LED-indicatorenJa