Ecler CLOUD handleiding
Handleiding
Je bekijkt pagina 9 van 32
9
DESCRIPTION &
CHARACTERISTICS
REGISTER
ADD A DEVICE
EclerCLOUD
API
WebGUI
COMPATIBLE
DEVICES
4. ADD A DEVICE: FIRST STEPS
To add a device to EclerCLOUD, the device must be connected to the Internet. It is
recommended to read the respective instruction manuals of the compatible devices for
further details. This manual describes the basic configuration for starting up the equipment.
See the list of EclerCLOUD-compatible devices and their respective User manuals in the
‘EclerCLOUD-compatible devices’ chapter.
4.1 Internet connection
The device requires an Internet connection to communicate with EclerCLOUD. It will need to
be connected to a network from which it can access the Internet.
4.1.1 Starting up the equipment.
1. Connecting to the mains.
Make sure your device is connected to the mains.
Check the User manual of the connected device to make sure you have
connected it properly; you can find the User manual on our website at
www.ecler.com
2. Network connection: network switch or network router
An RJ-45 connector allows the equipment to be connected to an Ethernet
network. Connect the device to your network router using a network cable.
CAT5e or higher recommended.
4.1.2 Connection via Ethernet cable
The Ethernet network interface of the device is configured by default in dynamic
addressing mode (DHCP) and will be assigned an automatic IP by the DHCP
server (make sure that the router or network switch has this option enabled), so it
will not be necessary to configure any parameters on the device. Connect the device
to your router or network switch and the device is ready to be added to
EclerCLOUD.
If static addressing (STATIC) is required, please refer to the corresponding section in
the User manual of the corresponding equipment; see the ‘EclerCLOUD compatible
devices’ chapter.
Bekijk gratis de handleiding van Ecler CLOUD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecler |
| Model | CLOUD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5265 MB |
