Eaton Green Motion XCI000411 handleiding
Handleiding
Je bekijkt pagina 91 van 107
Steps to configure 4G LTE connection settings:
Step 1. Go to the “4G / Cellular” section (Figure 71).
Step 2. Make sure the “Enabled” checkbox is checked.
Step 3. In the “Routing” field, select "Uplink (To internet)".
Step 4. In the “Provider” field, select your SIM card provider from the drop-down menu.
Step 5. Click “Save” and “Apply.”
This section is available only for the products that support 4G LTE.
Green Motion Building EV chargers are preconfigured with the SIM card settings for the following mobile network
operators:
•
Hologram
•
Swisscom M2M
•
Vodafone
In case the SIM card from another mobile network operator is used, select "custom" from the Provider drop-down menu
and fill the parameters provided by the SIM card provider:
•
APN link
•
APN Username
•
APN Password
Figure 70. 4G LTE connection settings for the Master EV Charger using a predefined SIM card provider
91GREEN MOTION BUILDING INSTALLATION MANUAL MN191028EN April 2024 www.eaton.com
Bekijk gratis de handleiding van Eaton Green Motion XCI000411, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eaton |
| Model | Green Motion XCI000411 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16416 MB |
