Eaton Green Motion XCI000411 handleiding
Handleiding
Je bekijkt pagina 28 van 107
6. Electrical and network connections
6.1 Caution
Installation, commissioning, maintenance or retrofitting of the EV charger must be performed by professional and
qualified personnel, who are responsible for complying with existing standards and local installation regulations.
For safety reasons, an appropriately rated input load disconnector must be provided for each individual product. No
load should be connected directly to the product during installation.
Connect only one EV charger for each circuit breaker and residual current device (RCD) (if required by local
regulations). The circuit breaker serves as a mains disconnector.
Before starting connection operations, ensure that the external AC-line main switch is disconnected, and circuit
breakers are open.
Any operation requiring the main converter box to be opened can lead to electric shock hazards.
6.2 Standard wiring
To connect the EV charger to the electrical panel, professional and qualified personnel should consider the following guidelines
and refer to Table 8.
Table 8. Overview of parameters for dimensioning of the protective devices and power supply line
Green Motion Building model Green Motion Building 22 kW
Green Motion Building power range 3.7 kW 7.4 kW 11 kW 22 kW
Charging current limitation 16 A 32 A 16 A 32 A
Input voltage 230 V 230 V 400 V 400 V
Power supply terminal block max. section
(2)
10 mm
2
10 mm
2
10 mm
2
10 mm
2
Type A RCD protection at panel according to
IEC 61851-1:2017
(3)
30 mA 30 mA 30 mA 30 mA
Rated current at panel 20 A 40 A 20 A 40 A
The protective earth conductor must have a cross-section at least equal to or greater than the cross-section of the
cables for connection to the public grid (AC) and in accordance with the requirements of local regulations.
(2)
Rigid wires are recommended for the power supply. These cross sections must be re-assessed by professional and qualified personnel
depending on the length of the wires.
(3)
Always refer to your local installation regulations.
28
GREEN MOTION BUILDING INSTALLATION MANUAL MN191028EN April 2024 www.eaton.com
Bekijk gratis de handleiding van Eaton Green Motion XCI000411, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eaton |
| Model | Green Motion XCI000411 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16416 MB |
