Eaton Green Motion XCI000411 handleiding
Handleiding
Je bekijkt pagina 23 van 107
5.3 Mounting
The EV charger can be mounted directly onto the wall or on a floor-mounted column (optional).
The power supply cable is introduced through the cable gland on the bottom of the EV charger.
Step 1. Use a spirit level to place the drilling template level on the wall. Make sure the template’s top is at a height
of 1500 mm from ground level, for optimal accessibility.
(1)
Step 2. Mark the holes with a pencil and remove the drilling template.
Step 3. Drill four holes in the wall as shown in Figure 8.
Step 4. Place four gaskets around the four slots on the outside of the unit, as shown in Figure 9. The T2S socket
version of the product should be installed using the provided spacers, as illustrated in Figure 10.
Step 5. Fix the unit to the wall with four ø 6-mm screws.
1
Refer to national requirements to make the EV charger accessible to disabled people.
Please note that the appropriate type of wall plugs and screws must be selected by professional and
qualified personnel, based on the following considerations:
•
the installation location,
•
the type of the wall on which the EV charger is to be mounted.
This is to ensure the safest possible mounting of the Green Motion Building EV charger.
23GREEN MOTION BUILDING INSTALLATION MANUAL MN191028EN April 2024 www.eaton.com
Bekijk gratis de handleiding van Eaton Green Motion XCI000411, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eaton |
| Model | Green Motion XCI000411 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16416 MB |
