Easymaxx 16411 handleiding
Handleiding
Je bekijkt pagina 2 van 4
ASSEMBLY INSTRUCTIONS
16411
Dear Customer,
We are delighted that you have chosen the EASYmaxx telescopic insect screen for roof
windows. Before using the product for the first time, please read through the assembly
instructions carefully and store them in a safe place. If you have any questions, contact the
customer service department via our website: www.ds-group.de/kundenservice
IMPORTANT NOTICES
■ The product is suitable for use as an insect protector in roof window recesses
(min.60 x 88 cm to max. 98 x 158 cm). It is not suitable for fitting in doorways.
■ The product is for personal use only and is not intended for commercial applications.
■ Use the product only for the intended purpose and as described in the assembly
instructions. Any other use is deemed to be improper.
■ Keep the packaging material away from children and animals. There is a danger of
suffocation!
■ The product is not a toy! Children must be supervised in order to ensure that they
donot play with the product.
■ Protect the product from fire and sharp and pointed objects.
■ Do not use any caustic or abrasive cleaning agents. If necessary, wipe with a damp
cloth and mild cleaning agent.
■ If the product will not be used for a prolonged period of time, remove it from the
window opening and, if necessary, adjust it to the smallest possible size and unfold
it (see the “Assembly” chapter). Store the product in a dry place out of the reach of
children and animals.
ITEMS SUPPLIED
A Roof window mosquito net (frame incl. net), 1 x
B Spring element (insert with spring-loaded pusher), left, 2 x
C Spring element (insert with spring-loaded pusher), right, 2 x
D Brush seal (self-adhesive, approx. 5.5 m), 1 x
E Mesh protection studs (self-adhesive), 6 x
• Assembly instructions, 1 x
Check the items supplied for completeness and the components for transport damage. If
you find any damage, do not use the product but contact our customer service department.
PRODUCT DATA
Article number: 16411
Model number: JHK-16018C
Dimensions (frame): min. approx. 63.5 x 93 cm
max. approx. 101.5 x 161 cm
ID of assembly instructions: Z 16411 M DS V1 0425 as
NOTICES FOR ASSEMBLY
Please Note!
■ We recommend carrying out the assembly with two people.
■ Note the orientation of the mesh sides: The zipper must face the room so it can be
opened / closed after installation. The spring-loaded pushers must face the window.
■ Lengthen or shorten opposite frame edges as evenly as possible toavoid tilting.
■ Be careful when reducing the size of the frame. There is a danger of crushing!
■ When the product is delivered, the shorter edges of the frame are extended a little.
To be able to fix the frame in a smaller window opening (short side <87 cm), after
plugging the frame together the shorter edges must initially be pushed together.
Assembling the Frame
1. Fold open the net (A) with the edges of the frame (Picture1).
2. Make sure that the edge of the net is inside the guide at all 8 corner halves (Picture2).
3. Plug together the corners of the frame so they are flush ( Picture3).
4. If necessary, align the zipper parallel to the frame. To do this, carefully and evenly
slide the net close to the frame in the desired direction.
5. Insert one of the spring elements into each corner of the right and left frame edges.
Select the appropriate spring element(B or C) for each corner and pay attention to the
orientation (Picture4).
Adjusting the Frame Size
• Increasing(Picture5): Hold the assembled frame firmly on one edge. At the same
time, pull the opposite edge outwards to increase the length of the other two edges
ofthe frame.
• Decreasing (Picture6): Press in the locking lug for each frame edge (1.) to release
thelocking mechanism. At the same time, carefully push in the frame edge (2.).
Inserting the Frame
1. Make sure that the frame is assembled correctly (see the “Assembling the Frame”
section).
2. Adjust the frame height (see the “Adjusting the Frame Size” section; Picture7):
Hold the bottom edge firmly while doing this. After adjustment, the spring-loaded
pushers must rest against the window reveal at the top and bottom.
3. Adjust the frame width: After adjustment, the spring-loaded pushers must be in
contact with the window reveal on the right and left and be pressed in as far as
possible (Picture8) so that the frame holds itself in the window reveal with the
maximum spring force.
L
Depending on the window reveal, there may be gaps between the reveal and
the frame. To close these gaps, the supplied brush seal can be attached to the
frame after it has been adjusted to the correct size.
• Attaching the brush seal(D):
1. Suitable for all the gaps between the frame and the window reveal: Cut the
brush seal to the appropriate lengths. The spring-loaded pushers(B and C)
should not be pasted over.
2. Carefully take the fitted frame out of the window reveal: To do this, push the
frame evenly to the right or left; At the same time, fix the spring-loaded pushers
on the opposite side with one finger each to prevent them from springing out
suddenly. Then take out the frame and slowly release all spring-loaded pushers.
3. Make sure the frame is clean, dry and free of grease; clean it if necessary.
4. Peel off the backing and stick the brush seal onto the frame (Picture9).
5. Put the frame back in place. To do this, lightly press in the spring-loaded
pushers on one side. Align the frame so that the zipper is as close to the
window handle as possible.
• Attach the mesh protection studs(E): Peel off the backing and stick one stud to the
window at each contact point between the window and the mesh (Picture10, 11).
USE
The window can also be opened/closed with the frame inserted. To do so, hold the tabs
next to the zipper, then open/close the zipper (Picture12).
DISPOSAL
Dispose of the packaging material in an environmentally friendly manner so
that it can be recycled.
Waste prevention makes an even more valuable contribution to protecting the
environment. This means if possible, as well as continuing to use or repair a
product yourself, passing it on to another user also represents an ecologically
beneficial alternative to disposal.
All rights reserved.
DS Produkte GmbH
Stormarnring 14 · 22145 Stapelfeld · Germany
CUSTOMER SERVICE
Am Heisterbusch 1 · 19258 Gallin · Germany
✆ +49 38851 314650
*
| kundenservice@dspro.de
*
Calls to German landlines are subject to your provider’s charges.
16411_DE-EN_A4_V1.indd 216411_DE-EN_A4_V1.indd 2 14.04.2025 14:22:3814.04.2025 14:22:38
Bekijk gratis de handleiding van Easymaxx 16411, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Easymaxx |
| Model | 16411 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2451 MB |
