Easymaxx 01950 handleiding
Handleiding
Je bekijkt pagina 10 van 24
EN
10
NOTICE – Risk of Damage to Material
and Property
■ Use only the battery type specified
inthe technical data.
■ Always replace all batteries together.
Do not use batteries of different types
or brands, or batteries with different
capacities. When replacing batteries,
ensure the correct polarity (+ / –).
■ Remove the batteries when they are
dead or if you will not be using the
product for a prolonged period. This
will prevent any damage caused by
leaks.
■ Remove a dead battery immediately
and clean the contacts before you
insert new batteries.
■ Non-rechargeable batteries must not
be recharged or reactivated by other
means, dismantled, thrown into a fire,
immersed in fluids, or short-circuited.
■ Do not place any heavy objects on
the product.
■ Do not place any containers filled
with liquid, for example vases, on or
directly next to the product.
■ Never immerse the product in water
or other liquids!
■ Make sure that the USB cable does
not become squashed or bent and
does not come into contact with hot
surfaces.
■ Use only original accessories from the
manufacturer in order to guarantee
that there is no interference that may
prevent the product from working and
to avoid possible damage.
■ Protect the product from: fire, heat
sources, impacts, sub-zero tempera-
tures, temperature fluctuations and
persistent moisture.
■ The individual LEDs cannot be
replaced.
INSERTING / CHANGING
BATTERIES
Light Box
L
Batteries are also required for
battery mode (see the “Technical
Data” chapter). These are not
supplied with the product.
1. Open the battery compartment on
the back or bottom of the product:
Press down the locking lug on the
battery compartment cover. Pull up
the cover at the same time.
2. Remove the used batteries if necessary
and insert new batteries (1.5 V,AA). Pay
attention to the correct polarity (+ / –).
3. Reinsert the battery compartment cov-
er and press it down. It must engage.
Remote Control
Push
Pull
1. The battery compartment is located
on the narrow side of the remote
control. Pull it out as shown.
2. Remove the used battery and insert
a 3 V battery (CR2025). The positive
pole must be facing upwards.
3. Slide the battery compartment back
into the remote control. It must
engage.
01947_01948_01949_01950_01950_DE-EN-FR-NL_A5_V2.indb 1001947_01948_01949_01950_01950_DE-EN-FR-NL_A5_V2.indb 10 21.10.2022 08:35:5721.10.2022 08:35:57
Bekijk gratis de handleiding van Easymaxx 01950, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Easymaxx |
| Model | 01950 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3060 MB |
