Dyson V9 Submarine handleiding
Handleiding
Je bekijkt pagina 8 van 15
clik
clik
Clearing blockages
clik
2
1
clik
2
1
clik
2
1
clik
2
1
clik
2
1
clik
2
1
clik
2
1
clik
2
1
Disconnect your machine from the charger before looking for blockages.
Be careful not to touch the trigger and be aware of sharp objects.
Leave your machine to cool down before looking for blockages.
Don’t use your machine when looking for blockages as this could
cause injury.
If your machine detects a blockage, the motor will pulse six times. You won’t
be able to use your machine until the blockage has been cleared.
If you try to use your machine when the motor is pulsing, it will automatically
cut out.
Leave your machine to cool down before looking for blockages and, for your
safety, take care not to touch the trigger.
Turn the cleaner
head over to check
for obstructions on
the brush bar and
air inlet.
With the wand
removed from the
machine, check for
blockages at both
ends of the wand.
With the bin removed,
check for blockages,
paying particular
attention to the air
inlet, located at on the
right-hand side of the
machine just below
the point where the bin
joins the main body of
the machine.
Check for blockages in
the filter end and bin
ends of the machine.
Remove any obstructions
from the brush bar.
The bin being removed
and the location of the
bin release lever on the
underside of the bin
runner.
Bekijk gratis de handleiding van Dyson V9 Submarine, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dyson |
| Model | V9 Submarine |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 2188 MB |
