Dyson V9 Submarine handleiding
Handleiding
Je bekijkt pagina 11 van 15
How to clean your Dyson
Submarine™ wet roller head
Step 1
Turn off your machine and detach the Dyson Submarine™ wet roller
head from the wand. Place it in the drip tray immediately to prevent
dirty water spillage.
Step 5
Leave the wet roller to air dry in a warm, well-ventilated space.
Use a cloth to wipe away any dirt or excess water from the main roller head,
waste extraction tray and water reservoir.
We recommend replacing the wet roller every six months, depending on how
often you use your machine, to help maintain performance.
Step 2
Hold the wet roller head level in the drip tray.
Step 3
Hold the wet roller head over a sink. Remove it from the drip tray.
Hold the wet roller head at the edges, press the red Quick-release
button and slide out the removable cassette from the main roller head.
Remove the red dirty water tank cap to empty the waste extraction tray.
Step 4
Don’t get water on the neck of the wet roller head, as it may damage the
connection to the wand.
Disassemble the Submarine™ wet roller head. Every part of the wet roller
head can be washed with water and a household anti-bacterial solution
diluted according to the manufacturer’s recommended ratio.
Empty any leftover water from the water reservoir.
Drip tray
Water reservoir and
waste extraction tray
Wet roller
A hand removing
the wet roller
head from the
drip tray.
A hand removing the red dirty
water tray cap and emptying
the dirty water and waste.
The wet roller head held by the neck with-
out the drip tray. Water is shown dripping
from the roller head. A red cross icon
indicates incorrect usage.
The waste extraction tray, water
reservoir, wet roller and drip tray
accompanied by blue tap icons.
A hand holding a cloth
next to the main roller
head, roller, waste
extraction tray and water
reservoir, with sun, ventila-
tion and hourglass icons.
A green arrow
indicating how the
wand detaches
from the Dyson
Submarine wet
roller head, and
how to put the wet
roller head into
the drip tray after
wet cleaning.
Image of water
reservoir and waste
extraction tray without
wet roller brushbar or
drip tray.
Image of
wet roller
brushbar.
Image of
drip tray.
Red cross indicating the neck cannot be
exposed to water. The main roller head
with a green circle and water tap means
it can be washed with water.
The wet roller head
being placed in
the drip tray, held
at the sides, with a
green tick to indicate
correct usage.
Bekijk gratis de handleiding van Dyson V9 Submarine, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dyson |
| Model | V9 Submarine |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 2188 MB |
