DVDO -XTEND-USBC-USB-100 handleiding
Handleiding
Je bekijkt pagina 3 van 8
1 /5
1. Introduction
DVDO-Xtend-USBC-USB-100 is a USB extender that can transmit USB 3.2 Gen 1 signals
up to 100m/328ft via a single CAT6a cable. The transmitter features one USB-C host
port, one USB-C and two USB-A device ports. The receiver features two USB-C and
two USB-A device ports.
Bi-directional 24V PoC (Power over Cable) function allows user to only supply power to
either the transmitter or the receiver.
It can be widely used for long distance USB signal transmission between USB sources and
devices like webcams, PTZ cameras, keyboards, mouse devices, USB microphones, flash
sticks, printers, scanners, touch panel displays and other USB devices.
2. Features
- Extension of USB 3.2 Gen 1 up to 100m/328ft via CAT6a cable
- USB 3.2 Gen 1 connectivity with data transfer rate up to 5Gbps
- Backwards compatible with USB 2.0 and 1.1
-
Hardware acceleration for isochronous and bulk transfer
-
TX features 1x USB-C host port, 1x USB-C and 2x USB-A device ports
- RX features 2x USB-C (1x 5V@1A and 1x 5V@1.5A)
and 2x USB-A device ports (1x 5V@1A and 1x 5V@1.5A)
- Support bi-directional 24V PoC (Power over Cable), when TX or RX gets power, the
other end does not need an external power supply
- Plug-and-play with no drivers, downloads, or software required
3. Package Contents
① 1 x USB 3.2 Gen 1 Extender (Transmitter)
② 1 x USB 3.2 Gen 1 Extender (Receiver)
③ 1 x 24V/3.75A Power Supply
④ 2 x 4pin-3.5mm Phoenix Connectors (Male)
⑤ 4 x Mounting Ears
⑥ 8 x Machine Screws (KM3*4)
⑦ 1 x User Manual
Bekijk gratis de handleiding van DVDO -XTEND-USBC-USB-100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DVDO |
| Model | -XTEND-USBC-USB-100 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 739 MB |
