DVDO -Splitter-12-SE handleiding
Handleiding
Je bekijkt pagina 8 van 10
7
INPUT LED
device with a HDMI cable.
3
HDMI
OUTPUT
LED
These blue LEDs will illuminate when the
HDMI OUT port has connected an active
display device with a HDMI cable.
4
SERVICE
port
Firmware update. (Manufacturer use only.)
5
EDID
AUTO: Compare OUT 1 and OUT 2 displays
EDID setting, then output the best resolution
to source device, the source will transmit the
signal again to all outputs.
COPY: Copy the HDMI OUT 1 port EDID setting
to source device, the source device will
transmit again the signal to all outputs.
6
Dial switch
(4K→
1080P)
OFF: When the dial switch is in‘OFF’
position, signal input and output is bypass
status.
ON: When the dial switch is in‘ON’position,
signal input will downscale (4k->1080P )
output.
Bekijk gratis de handleiding van DVDO -Splitter-12-SE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DVDO |
| Model | -Splitter-12-SE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 833 MB |
