DVDO -Matrix-44SS-MV-VW handleiding
Handleiding
Je bekijkt pagina 15 van 41
13 / 38
12. Web GUI User Guide
The Matrix can be controlled by Web GUI. The operation method is shown as below:
Step 1: Get the current IP Address.
The default IP address is 192.168.0.100. You can get the current Matrix IP address
in two ways:
The first way: You can get the IP address via IR remote. Pressing the INFO button
on the IR remote, the IP address and serial baud will be displayed in the top right
corner of the screen.
The second way: You can get the IP address via RS-232 control. Send the
command “r ip addr!” through an ASCII Command tool, and then you’ll get the
feedback information as shown below:
IP: 192.168.0.100
IP:192.168.0.100 in the above figure is the IP Address of the Matrix (the IP address
is variable, depending on what the specific machine returns).
For the details of ASCII control, please refer to “13. RS-232 Control Command”.
Step 2: Connect the TCP/IP port of the Matrix to a PC with an UTP cable, and set
the IP address of the PC to be in the same network segment with the Matrix.
Step 3: Input the IP address of the Matrix into your browser on the PC to enter Web
GUI page.
After entering the Web GUI page, there will be a Login page, as shown below:
Bekijk gratis de handleiding van DVDO -Matrix-44SS-MV-VW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DVDO |
| Model | -Matrix-44SS-MV-VW |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4796 MB |
