DVDO -Matrix-42-HDBT handleiding
Handleiding
Je bekijkt pagina 41 van 42
38
9. Firmware Upgrade
Please follow the steps below to upgrade the firmware by the FW port on the front
panel:
1) Prepare the latest upgrade file (.bin) and rename it as “FW_MERG.bin”.
2) Connect the switcher to the PC with USB to Micro USB cable, and then power on
the switcher. The PC will automatically detect a U-disk named of “BOOTDISK”.
3) Double-click the U-disk, a file named of “READY.TXT” would be shown.
4) Directly copy the latest upgrade file (.bin) to the “BOOTDISK” U-disk.
5) Reopen the U-disk to check the filename “READY.TXT” whether automatically
becomes “SUCCESS.TXT”, if yes, the firmware was updated successfully,
otherwise, the firmware updating is fail, the name of upgrade file (.bin) should be
confirmed again, and then follow the above steps to update again.
6) Remove the USB to Micro USB cable after firmware upgrade, and reboot the
switcher.
Bekijk gratis de handleiding van DVDO -Matrix-42-HDBT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DVDO |
| Model | -Matrix-42-HDBT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4527 MB |
