DVDO -Matrix-42-HDBT handleiding
Handleiding
Je bekijkt pagina 39 van 42
36
Command
Description
Command Example
2 - Send the RS232 string two times.
[param4] = ASCII string or HEX string.
(e.g. The string is used to turn off display
device)
Note: The command does not need
command ending “<CR><LF>”.
>SetOffRptDly [param1]
When the above Off RS232 command is
set to be repeated 2 times, the interval
between the two commands can be set
by this command. [param1] = 300-10000
(ms)
>SetOffRptDly 300
<OffRptDly 300
>GetOffRptDly
Get the sending interval between two Off
RS232 commands.
<OffRptDly 300
>Send_A_[param1]_
[param2]:[param3]
Send ASCII command to the desired
RS232 port.
[param1] = 1~5
1 - Local
2 - HDBT input 1
3 - HDBT input 2
4 - HDBT output A.
5 - HDBT output B.
[param2] = 1~7 (Baud rate)
1 - 115200 2 - 57600 3 - 38400
4 - 19200 5 - 9600 6 - 4800
7 - 2400
[param3] = ASCII string.
Note: The command does not need
command ending “<CR><LF>”.
>Send_A_1_1:abc123
…
>Send_H_[param1]_
[param2]:[param3]
Send HEX command to the desired
RS232 port.
[param1] = 1~5
1 - Local
2 - HDBT input 1
3 - HDBT input 2
4 - HDBT output A.
5 - HDBT output B.
[param2] = 1~7 (Baud rate)
1 - 115200 2 - 57600 3 - 38400
4 - 19200 5 - 9600 6 - 4800
7 - 2400
>Send_H_1_1:31 32 33
…
Bekijk gratis de handleiding van DVDO -Matrix-42-HDBT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DVDO |
| Model | -Matrix-42-HDBT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4527 MB |
