DVDO -Matrix-42-HDBT handleiding
Handleiding
Je bekijkt pagina 38 van 42
35
Command
Description
Command Example
>SetRS232Mode
[param1]
Set the RS232 mode.
[param1] = 1~4
1 - Local Control.
2 - HDBT Transmitter Pass Through
3 - HDBT Receiver Pass Through
4 - Pass Through Between Transmitter
and Receiver.
Note: The RS232 mode can be set by
GUI RS232 tab.
>SetRS232Mode 1
>SetRS232Mode 2
>SetRS232Mode 3
>SetRS232Mode 4
<RS232Mode 1
<RS232Mode 2
<RS232Mode 3
<RS232Mode 4
>GetRS232Mode
Get the RS232 control mode.
<RS232Mode 2
>SetOn_[param1]_
[param2]:[param3]
When the switcher is powered on, it
automatically sends the saved RS232
command to control the far-end third-
party devices.
[param1] = A, H.
A - ASCII command format.
H - HEX command format.
[param2] = 1~7 (Baud rate)
1 - 115200 2 - 57600 3 - 38400
4 - 19200 5 - 9600 6 - 4800
7 - 2400
[param3] = ASCII string or HEX string.
(e.g. The string is used to turn on display
device)
Note: The command does not need
command ending “<CR><LF>”.
>SetOn_A_1:abc123
<SetOn_Ascii
(Baud)115200 abc123
>SetOff_[param1]_
[param2]_[param3]:
[param4]
When the switcher is powered off, it
automatically sends the saved RS232
command to control the far-end third-
party devices.
[param1] = A, H.
A - ASCII command format.
H - HEX command format.
[param2] = 1~7 (Baud rate)
1 - 115200 2 - 57600 3 - 38400
4 - 19200 5 - 9600 6 - 4800
7 - 2400
[param3] = 1, 2
1 - Send the RS232 string once.
>SetOff_A_1_2:abc123
SetOff_Ascii
(Baud)115200 (Repeat)2
abc123
Bekijk gratis de handleiding van DVDO -Matrix-42-HDBT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DVDO |
| Model | -Matrix-42-HDBT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4527 MB |
