DVDO -Matrix-42-HDBT handleiding

42 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 31 van 42
28
Command
Description
Command Example and
Feedback
<SignalDetMode TMDS
<SignalDetMode 5V
>GetSignalDet
Get the input signal detection method.
<SignalDetMode TMDS
<SignalDetMode 5V
>Set5VSource [param1]
In auto switching mode, set the detection
method of HDBT inputs to detect the
signal of transmitter to ensure different
transmitters can be used.
[param1] = HW, FW.
HW - Hardware detection.
FW - Firmware detection.
>Set5VSource HW
>Set5VSource FW
<HDBTIN5VSourceFrom
HW
<HDBTIN5VSourceFrom
FW
>Get5VSource
Get the detection method of HDBT inputs
to detect the signal of transmitter to
ensure different transmitters can be used.
<HDBTIN5VSourceFrom
HW
<HDBTIN5VSourceFrom
FW
>SetDownScaler [param1]
[param2]
Set the down-scaling function of output
[param1].
[param1] = OutA, OutB.
[param1] = Null, all outputs.
[param2] = En, Dis.
En - Enable down-scaling function.
Dis - Disable down-scaling function.
>SetDownScaler En
>SetDownScaler Dis
<DownScaler True
<DownScaler False
>GetDownScaler [param1]
Get the down-scaling function setting
status of output [param1].
[param1] = OutA, OutB.
[param1] = Null, all outputs.
>GetDownScaler
<DownScaler True
<DownScaler False
>SetDhcp [param1]
Enable/disable DHCP (Dynamic Host
Configuration Protocol).
[param1] = En, Dis.
En - Enable DHCP.
Dis - Disable DHCP.
>SetDhcp En
>SetDhcp Dis
<Dhcp True
<Dhcp False
>GetDhcp
Get DHCP status.
<Dhcp True
<Dhcp False
>SetIpAddr
[param1].[param2].[param
3].[param4]
Set GUI IP.
[param1] = 0 ~ 255.
[param2] = 0 ~ 255.
[param3] = 0 ~ 255.
[param4] = 0 ~ 255.
>SetIpAddr 192.168.0.178
<SetIpAddr 192.168.0.178

Bekijk gratis de handleiding van DVDO -Matrix-42-HDBT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkDVDO
Model-Matrix-42-HDBT
CategorieNiet gecategoriseerd
TaalNederlands
Grootte4527 MB