DVDO -Matrix-42-HDBT handleiding
Handleiding
Je bekijkt pagina 28 van 42
25
8.1.3 RS232 Pass-through Between Matrix Switcher and Receiver
1) To control local third-party device from remote receiver location, first determine
which HDBaseT receiver is connected to. Next, connect a PC to the RS232 port of
HDBaseT receiver, then connect a third-party device (e.g. projector) to the RS232
port of matrix switcher, the connection diagram is shown as below:
2) To control remote third-party device from local matrix switcher location, first
determine which HDBaseT receiver is connected to. Next, connect a PC to the
RS232 port of matrix switcher, then connect a third-party device (e.g. projector) to
the RS232 port of HDBaseT receiver, the connection diagram is shown as below:
Bekijk gratis de handleiding van DVDO -Matrix-42-HDBT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DVDO |
| Model | -Matrix-42-HDBT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4527 MB |
