DVDO -Matrix-42-HDBT handleiding
Handleiding
Je bekijkt pagina 26 van 42
23
3) To control the matrix switcher from remote receiver location, please connect one or
two PCs to the RS232 ports of HDBaseT receivers with the 3-pin to DB9 RS232
cables. The matrix switcher can be controlled by any one of PCs, the connection
diagram is shown as below:
8.1.2 RS232 Pass-through Between Matrix Switcher and Transmitter
1) To control local third-party device from transmitter location, first determine which
HDBaseT transmitter is connected to. Next, connect a PC to the RS232 port of
HDBaseT transmitter, then connect a third-party device (e.g. projector) to the
RS232 port of matrix switcher, the connection diagram is shown as below:
Bekijk gratis de handleiding van DVDO -Matrix-42-HDBT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DVDO |
| Model | -Matrix-42-HDBT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4527 MB |
