DVDO -Matrix-42-HDBT handleiding
Handleiding
Je bekijkt pagina 20 van 42
17
2) RS232 Mode
⚫ Select command sending port.
✓ Local: Send RS232 commands to control the local third-party which is
connected to the RS232 port of the switcher.
✓ HDBT In 1: Send RS232 commands to control the far-end third-party which is
connected to the RS232 port of HDBaseT transmitter. The transmitter is
connected to the HDBT input 1 port.
✓ HDBT In 2: Send RS232 commands to control the far-end third-party which is
connected to the RS232 port of HDBaseT transmitter. The transmitter is
connected to the HDBT input 2 port.
✓ HDBT Out 1: Send RS232 commands to control the far-end third-party (e.g.
projector) which is connected to the RS232 port of HDBaseT receiver. The
receiver is connected to the HDBT output 1 port.
✓ HDBT Out 2: Send RS232 commands to control the far-end third-party (e.g.
projector) which is connected to the RS232 port of HDBaseT receiver. The
receiver is connected to the HDBT output 2 port.
⚫ Set command format to HEX or ASCII.
⚫ Baud Rate: Supports 2400, 4800, 9600, 19200, 38400, 57600 or 115200.
⚫ Command Ending: NULL, CR, LF or CR+LF can be chosen.
⚫ Command: Type command in this textbox, and then click Send to control the third-
Bekijk gratis de handleiding van DVDO -Matrix-42-HDBT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DVDO |
| Model | -Matrix-42-HDBT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4527 MB |
