DVDO -CAMERA-CTL-2 handleiding
Handleiding
Je bekijkt pagina 8 van 16
-
07-
>
Network
mode
connection
diagram
The controller and PTZ camera are connected in the same LAN, and the IP addresses are in the
same network segment, such as: 192.168.1.123 and 192.168.1.111.
Belong to the same network segment; If not in the same LAN, you need to modify the IP address
of the controller or camera at first, the default IP acquisition method of the controller is get it
dynamically.
192.168.1.111 192.168.1.123 XXX.XXX.X.XXX
NVR/Switcher
192.168.123
(Applicable protocol: ONVIF/IPVISCA/NDI)
>
Add Analog Camera
(1)
Press the confirm button to enter the camera ID, set to select the Visca (Pelco D/P) protocol,
press the [Enter] button to save
(2)
Enter the camera address code, press [Enter] button to save
(3)
Input camera baud rate, press [Enter] button to save
(4)
Input serial port ID, press [Enter] button to save
Bekijk gratis de handleiding van DVDO -CAMERA-CTL-2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DVDO |
| Model | -CAMERA-CTL-2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2305 MB |
