DVDO -4KSGA-1 handleiding
Handleiding
Je bekijkt pagina 3 van 7
2
Product Description
1. HDMI OUT: Connects to HDMI display device. DVDO-4KSGA-1 is used
as a HDMI signal generator to output HDMI signal.
2. HDMI IN: Connects to HDMI source device. DVDO-4KSGA-1 is used as
a display emulator to detect the HDCP content and signal status (5V,
TMDS) of HDMI source.
3. SIG LED:
▪ When DVDO-4KSGA-1 is used as a HDMI signal generator, the LED
turns red when there is HDMI signal output.
▪ When DVDO-4KSGA-1 is used as a display emulator, the LED turns
green when only 5V signal is detected, or turns red when 5V and
TMDS signals are detected simultaneously, or off when no HDMI
signal input.
4. HDCP LED:
▪ When DVDO-4KSGA-1 is used as a HDMI signal generator, the
HDCP content can be selected by 4-pin DIP switch. The LED turns
green when HDCP 2.2 is selected, or red when HDCP 1.4 is
selected, off when no HDCP.
▪ When DVDO-4KSGA-1 is used as a display emulator, The LED turns
green when the HDCP content of HDMI source is HDCP 2.2, or red
Bekijk gratis de handleiding van DVDO -4KSGA-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DVDO |
| Model | -4KSGA-1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 624 MB |
