Duronic UC30 handleiding
Handleiding
Je bekijkt pagina 9 van 67
9
Troubleshooting
Problem Probable Cause Solution
The machine
won’t turn on.
Is the power supply
plugged into the socket
correctly?
Insert the power plug into the socket
correctly.
Is the power cord
damaged?
Stop attempting to use the machine.
Contact Duronic.
Items did not
clean properly
after washing.
Insufcient water in the
steel basin.
Add enough water to fully immerse the
cleaning items or ll to the "MAX" water
level line.
The item may need some
cleaning solution.
Add a small amount of cleaning
solution.
The dirt on the surface of
the item is very sticky.
Can be cleaned multiple times (the best
interval between two cleanings is 5
minutes).
The item has a lot of oil
on the surface.
The degreasing effect of tap water is
not strong enough to clean, be sure to
add a little cleaning solution to assist
cleaning.
Oxidised and blackened
surfaces of gold and silver
jewellery was not cleaned.
Add a small amount of professional
cleaning solution for gold and silver
jewellery to remove the surface oxidised
layer. Seek professional help if unsure.
The surface
of the item is
damaged after
cleaning.
The standard cleaning
power of the machine is
too strong.
Items with electroplating and spraying
treatment on the surface should have
a shorter cleaning time. Place delicate
items in a protective container or bag
before cleaning. Clean delicate items at
your own risk.
If you are unsure, take items to be
professionally cleaned. Do not attempt
to clean in the ultrasonic cleaner as this
may damage the item.
For any other problems or queries, please contact Duronic.
Bekijk gratis de handleiding van Duronic UC30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Duronic |
| Model | UC30 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4388 MB |
